Hjørne Spackling Tips


Hjørne Spackling Tips

Spackling eller "mudding" bruges til at dække sprækker, led, hjørner og skader i gips. Selvom spackling kun kræver simple værktøjer, kræver udjævning af mudderet rigtigt en vis færdighed. Spackling indenfor og udenfor hjørner udgør en ekstra udfordring. Følg disse tips til spackling udvendige og indvendige hjørner af gipsvæggen.


Spackling eller "mudding" bruges til at dække sprækker, led, hjørner og skader i gips. Selvom spackling kun kræver simple værktøjer, kræver udjævning af mudderet rigtigt en vis færdighed. Spackling indenfor og udenfor hjørner udgør en ekstra udfordring. Følg disse tips til spackling udvendige og indvendige hjørner af gipsvæggen.

Generelle Spackling Tips

  • Blandes spackle, blandes grundigt med en elektrisk mixer. Tilsæt nok vand til at gøre konsistensen som en glat jordnøddesmør.
  • Start med at pakke søm og skruehuller, og fortsæt derefter til de lange vandrette led, derefter de udvendige hjørner og derefter færdig med de indvendige hjørner.
  • Sørg for at du tillader nok tid til at tørre i mellem frakker. Hvis spacklen er grå, tørrer den stadig. Når det bliver hvidt, er det helt tørt.
  • Kør i koldt klima med en blæser eller varmeapparat for at fremskynde tørringsprocessen.
  • For alle spackling opgaver, køb en bred vifte af forskellige størrelse spartel knive. Til spackling hjørner kan en 8-, 10 og 12-tommer gøre jobbet.
  • Glem ikke at købe et indvendigt hjørneværktøj!

Udenfor Corner Spackling Tips

  • Målet er at afslutte udvendige hjørner i 3 frakker.
  • Den første frakke skal være den tyngste. Brug en 8-tommers kniv til at påføre mudderet, dække og fylde mellemrummet mellem væggen og hjørneperlen.
  • Placer putty kniven, så den ene kant af kniven er på hjørnet perlen og den anden ende over gipsvæggen.
  • På den anden frakke skal du bruge en større kniv (en 10-tommer fungerer godt).
  • Afslut med en tredje pels ved at udjævne kanterne, så de er usynlige, ved hjælp af en 12-tommers kniv.

Inside Corner Spackling Tips

  • Indvendige hjørner omfatter samlingen, der forbinder loftet og væggen.
  • Start med at anvende et tykt lag af spackle med en 8-tommers kniv. Glat ud med det samme ved hjælp af et hjørneværktøj. Et indvendigt hjørne gør jobbet meget lettere!
  • Fortsæt med at lave lange pas med det indvendige hjørneværktøj, starter i toppen og arbejder ned.
  • På den første frakke, fokus på hjørnet, skal du ikke bekymre sig om kanterne. Disse kan glattes ud med de næste par frakker.
  • Ideelt set bør hjørnesamlingen være færdig i slutningen af ​​den første frakke. Sand kanterne let mellem hver frakke.
  • Tilføj mere mudder til kanterne på hver side af hjørnet med en 8-tommers kniv til et andet og tredje lag. Fjær udad for at gøre kanten usynlig.
  • Hold påfør jakker og slibning, indtil hver led er uanmeldelig. Stop ikke med at spackle og slib, indtil fugekanterne er usynlige.

Med de rigtige værktøjer og teknik forsvinder ufuldkommenhederne i gipsvæg efter spackling og maling.

Hjørne Spackling Tips

FAQ - 💬

❓ How do you apply spackle smoothly?

👉 1:3811:17How to Spackle a WallStart of suggested clipEnd of suggested clipNow you'll want to put a big glob of speckle onto the screw. And completely fill the space next you'MoreNow you'll want to put a big glob of speckle onto the screw. And completely fill the space next you'll scrape it off with the trowel. Making it flush with the sheetrock.

❓ How do you make spackle look good?

👉 1:085:54How to Make a Drywall Patch InvisibleStart of suggested clipEnd of suggested clipMake it a little higher than the wall. So when we sand it down it will kind of even up and so we'llMoreMake it a little higher than the wall. So when we sand it down it will kind of even up and so we'll do that right now.

❓ Does spackle dry better in heat or cold?

👉 Cold air holds less water vapor than hot air, so air conditioners can remove a significant amount of excess moisture from the air by cooling a space, allowing spackle to dry faster.

❓ How do you sand spackle without making a mess?

👉 1:475:31SANDING SPACKLE - 5 TIPs for Less Mess, Better ResultsStart of suggested clipEnd of suggested clipAnd don't forget if you really want to have less mess we talked about wet sanding. You can take thatMoreAnd don't forget if you really want to have less mess we talked about wet sanding. You can take that block sander you can dampen it and you will have less dirt and dust when you sand.

❓ Is it OK to apply spackle with your fingers?

👉 Use your finger or the putty knife to smooth the Spackle over the hole. 4. Apply a second coat. Wait for the Spackle to dry and apply a second coat.

❓ Should you sand between coats of spackle?

👉 After the first coat has dried completely, you will need to sand and apply two more coats to the fasteners, sanding between each coat.

❓ Why is my spackle showing through my paint?

👉 Spackle is a more porous substance than the materials that make up the surrounding wall. Due to the porous surface, going without primer will ensure that the spackle spots appear as a dull spot on the surface of the wall. It is important to use primer on the spackle spot prior to painting the wall.

❓ Should I sand between coats of spackle?

👉 After the first coat has dried completely, you will need to sand and apply two more coats to the fasteners, sanding between each coat.

❓ How many coats of spackle do you need?

👉 three coatsApply a heavy coat of spackle over the tape, filling the depression between the drywall. Long joints will commonly require three coats. The first coat is the heaviest and uses the most spackle. The second coat, applied after the first has dried completely, levels the joint.

❓ How long should you wait to sand spackle?

👉 Fast-drying spackle may take only a few minutes to dry but it isn't wise to start sanding or painting for at least another 1-2 hours. Normal spackles will take 1-2 hours to fully dry but we don't recommend sanding or painting until a full 24 hours has passed and the drying is complete.

❓ How thick should spackle be applied?

👉 Spackle sticks to bare or painted drywall, plaster or wood surfaces. It will fill deep holes if they are small, but it's best to apply it no more than 1/4 thick at a time and to let it dry between layers. Applying spackle too thickly leads to cracks and excessive shrinkage.

❓ What type of Spackle should I use to fill a hole?

👉 A lightweight spackle includes a binding agent and works great for smaller holes. If your hole is as wide as ¾ inch, an all-purpose or heavy compound may be the better choice. Your next step is to prep the hole so the spackle will adhere well.

❓ Do you know how to Spackle and fill in dents and holes?

👉 At one point or another, there will be dents, dings, or holes in the walls of your home that will need to be repaired. So, knowing how to spackle and fill in these holes yourself can be a very useful skill. It’s actually a very simple process to learn if you know the steps and have the right set of tools to work with.

❓ How long does it take for Spackle to dry?

👉 Normal spackles will take 1-2 hours to fully dry but we don’t recommend sanding or painting until a full 24 hours has passed and the drying is complete. People often assume that joint compound and spackle are the same product.

❓ How do you fix a recessed Spackle patch?

👉 Use a damp cloth or rag to gently wipe any residual compound from the area you’ve been repairing. Most spackle compounds will shrink when drying. Go back and check to see if the patch has recessed. If so, simply apply another layer of spackle.

Videoer Relaterede Artikler: how to spackle basics.avi.